MODEL CSCLC LL: LEAD LINED CORE

Interior

An all purpose door of seven ply construction. Three ply hardwood doorskins are permanently bonded to wood slab and frame. The core consists of Structural Composite Lumber that utilizes wood strands from a variety of tree species providing an alternative to dimension lumber.

The material is engineered for strength and stability. While not really “lumber” it is marketed as a lumber substitute, to be used primarily in place of stave lumber core materials. SCL is tested under a number of ASTM and other test criteria. The precision surface core provides a smooth stratum for the hardwood doorskins.

QUALITY STANDARDS:

Premium Grade conforming to or exceeding WDMA Industry Standard I.S. 1-A and Architectural Woodwork Institute Section 1300.

MAXIMUM SIZE:

Single Door (unrated)
4/0 wide, 10/0 high

Pairs (unrated) 4/0 wide, 10/0 high,
(8/0x10/0 opening)

Thickness

1-3/4" (±1/16") or 2-1/4" (±1/16")

FRAME COMPONENTS:

Stiles - (Before Trim or Prefit)*
One piece, clear, matching/compatible hardwood face laminated, SCL back, for painting or staining. 1-1/4" total width. Minimum specific gravity of 0.39 for stile face and back.

Rails - (Before Trim or Prefit)* 1-3/4" SCL with minimum specific gravity of 0.39 clear, one piece..

INTERIOR BLOCKING:

None required.

CORE:

Structural Composite Lumber manufactured to WDMA Standards.

FACES:

1/8" 3 ply plywood or HPL meeting AWI or WDMA grading rules as specified. Type I or II bond as specified.

ASSEMBLY:

Core and frame are uniformly sized. Core and frame components are assembled and one half of required lead thickness is bonded to each side of core.

LEAD:

Full width and height sheet lead is applied to both sides of the core. 1/16" or 1/8" total lead thickness available.

ADHESIVE:

Type I or Type II bond, by specification, between faces and core/frame components.

WARRANTY:

Lifetime from date of manufacture. For original installation only.